Optimate 3 charger with maintenance function.
This charger does not have the Can-Bus function.
TECHNICAL FEATURES:
Battery charger, charge maintainer, optimizer and tester with automatic diagnosis, 5-phase operation with microprocessor, for 12V/2.5 to 5OAh lead/acid sealed batteries "MF" AGM-VRLA, gel, or conventional with caps.
It can be used for larger capacity batteries with a time
longer charge.
2 Desulphation phases, Standard (STD) and Turbo.
Microprocessor control and automatic multiphase program.
First automatic verification, in case of desulphation the first is activated
STD mode with a voltage of 16V and if necessary, after 5 seconds
you switch to Turbo mode with a voltage of 22V
desulphation occurs with current limited to 0.2A.
Switch to constant charge main charge mode.
Verification phase with limited voltage and, if necessary, an action a
pulsating voltage eliminates further sulphation and completes charging.
Charge current supply up to 14.5V with automatic changeover to
voltage limited to 13.6 V for 30 minutes and automatic verification of
maintenance of charge.
2 possible test results.
Battery maintenance during long periods of inactivity with
activation of the ecological mode of energy saving during the
maintenance. (0, O1 2Kwh/day).
Dust-proof and splash-proof P52 container, with plates for fixing to
integrated wall. Dimensions 190 x 75 x 56 mm.
Charging current 0.8A (max). Power supply 220/240V.
Total electronic protection against polarity reversals
Not usable for Nickel, NiCd, NC, NiMH, Lithium, Li-bon, Li-Poly batteries,
LiPo, non-rechargeable and dry cells.
